Optimator Argon-Mix Regulator – Gas Saving Regulator

This  Optimator Argon-Mix Regulator is a high performance multi-stage regulator with built-in economizer and flow meter.

It is mostly used for mig welding applications, where it will reduce the total welding cost by decreasing the gas consumption by up to 50%.

In addition, reduced porosity sensitivity improves weld quality. The regulator’s two stage function will give stable gas flow even when the cylinder pressure drops.

Optimators are available in a number of different models from side entry, bottom entry, lockable and manifold mount, please call us to discuss your requirements 028 90460541

To learn more about how the Optimator can reduce your shielding gas costs, please follow Save money on welding gas.

This welding regulator is available in a top entry input for BOC cylinders or similar and a side entry input for Air Products or similar cylinders.

Optimator series saves between 30-54% of shielding gas when welding. Investing in an Optimator instead of a normal regulator almost always pays off within 4-6 months, depending on how you weld.

This regulator will give you great return on your investment!

Most companies working with MIG/MAG and TIG welding know very well the price of welding wire per kilogram. But, relatively few are aware that the cost of the shielding gas is at least as high, per meter of weld. GasIQ Optimator is designed for one sole purpose, to reduce your consumption of expensive gas, generally by 30%. Just a few months using your this gas economizer and you will get your money back – the rest is pure profit.

Ordinary regulators are too slow.

This regulator provides an optimised shielding gas flow from the very first second. Any traditional regulator will not control the initial flow surge, which is unnecessarily high, and a very expensive waste. In worst cases this excessive surge represents up to 50% of your total shielding gas consumption! The higher the frequency of starts, the more gas is wasted and more money could be earned when you change to this product.

Quality without cost

Unit provides optimal start flow that is approx. 1/4 of the initial flow of a conventional regulator. This saves you shielding gas. The smooth initial flow, in addition, enables higher quality of welds since you minimize the turbulence that often influences your welding process.

There is a lockable version

Since we are talking about quality, it is important that you should know that the GasIQ Optimator  can be equipped with a lockable gas flow control. This is an advantage when you need to meet the highest welding quality demands, for instance ISO 9000 certification.