Furick Fupa 12 Ceramic Tig Cup Kit for 9/20 tig torches

Furick Fupa 12 ceramic Tig Cup kit includes 2 ceramic cups and a spare diffuser. It performs identical to the original glass version but has the added strength ceramic cups bring. The ceramic version comes only in 3/32 –  2.4 mm tungsten size and will thread on a 45V44 for 9/20 torches or the 17KIT for 17/18/26 torches . It does not require o’rings.  

The Fupa 12  will handle up to 200 amps non continuance and it is recommended for DC only applications. 

NOTE:  the diffusers in the cups are designed to work only with the “Furick” brand cups. We also recommend you buy a few spare diffusers to have, they are somewhat consumables and will eventually need to be replaced. The diffusers must be installed like you received them installed and must seal tightly around the cup or you will have poor results. They are designed to have a gap between the 2 layers of screens and it is recommended you install them back that way. It may take a few tries to get the screens in properly but have patience. The cupped side goes in first.

Key Features

• Ceramic construction: Added strength compared with the original glass version.
• For 9/20 torches
• 2.4mm tungsten compatibility: Designed for 3/32-inch electrodes.
• Up to 200 amps: Suitable for non-continuous use within this rating.
• DC applications only: Not recommended for AC TIG welding.
• Two-cup kit: Includes a spare diffuser for future maintenance.

Torch Compatibility

Fits 9/20 series TIG torches using a 45V44 gas lens, or 17/18/26 series torches using the Furick 17KIT. Check your torch configuration before ordering.

Replacement diffusers must fit tightly inside the cup, retaining the gap between the two screen layers.