ELGA Optimator is a high performance multi-stage regulator with built-in economizer and flow meter. It is mostly used for advanced gas shielded welding applications, where it will reduce the total welding cost by decreasing the gas consumption by up to 50%. In addition, reduced porosity sensitivity improves weld quality.The Optimator two stage function will give stable gas flow even when the cylinder pressure drops. The Optimator is available in a number models, top entry, side entry, lockable and manifold mount. Call us to discuss your requirements 0289046 0541 For more information about how the Elga Optimator can reduce you shield gas usage, follow http://www.gasiq.com/econtent/534
The Elga Optimator® produces an optimised shielding gas flow from the very first second. Any traditional regulator will not control the initial flow surge, which is unnecessarily high, and a very expensive waste. In worst cases this excessive surge represents up to 50% of your total shielding gas consumption! The higher the freqency of starts, the more gas is wasted and more money could be earned when you change to the Elga Optimato®r.
Quality without cost
The Elga Optimator® provides optimal start flow that is approx. 1/4 of the initial flow of a conventional regulator. This saves you shielding gas. The smooth initial flow, in addition, enables higher quality of welds since you minimize the turbulence that often influences your welding process.
Elga Optimator® also as lockable version
Since we are talking about quality, it is important that you should know that the Elga Optimator® can be equipped with a lockabel gas flow control. This is an advantage when you need to meet the highest welding quality demands, for instance ISO 9000 certification.
Technical Specifications Part.no. 3737-1010 Gas Argon-mix Connection inlet G5/8"ext Connection outlet G3/8" Maximum Input pressure 200 bar Scale flow meter 0-34 L/min Compliance with ISO 2503 Yes Weight (kg) 1,85